PYE STOPPING COMPOUND 30

Key Product Information

Product Code	PLST
Colour	Off-White
Packaging	20 kg
Cov.(app.)	Use as required

Overview

Is a gypsum plaster-based jointing compound for coating bases of plasterboard joints and angles. Holes or cracks on plasterboards can also be filled with this compound using the appropriate tools to produce fine surfaces.

• Jointing compound for coating bases of plasterboard joints and angles.

Application

Inspect all nails and drive protruding nails below surface leaving 1/32 inch depression in surface. Make sure surfaces are clean, dry and free from foreign materials.

Mixing

• Fill container with clean water.
• Sprinkle the stopping compound into the water (Approx. 2 or 3 parts of compound to 1 part of water depending on the consistency required).
• Allow to soak for 1 to 3 minutes before mixing.
• Mix to a smooth creamy workable consistency.
• Do not over mix otherwise it will accelerate the setting time of the mixture.

Application

• Apply the mixture, filling up the joints using a steel trowel.
• Apply evenly over the joints and remove excess compound.
• Apply to fill up uneven surfaces.

Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.

Product Detail

Technical Information

Colour	White
Form	Powder
Drying time	Allow 25 minutes depending on the thickness.

 

Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.

Principal Documents

• MSDS
• Data Sheet

Product information and image prepared from the PYE Products principal website. Source: PYE Products.