PYE PUTTY FILLA (Ready Mixed Acrylic-based Filler)
Ready Mixed Acrylic-based Filler
A ready-mixed quick drying filler for filling small cracks and surface defects, especially where surface may require painting or redecorating.
- Ready mixed, time saving.
- Economical and convenient to use.
- Product Code: FIPU
- Packaging: 500 gm, 1.5 kg, 5 kg, 25 kg
Quick Selection Notes
- Use this when: You need PYE PUTTY FILLA (Ready Mixed Acrylic-based Filler) to repair, seal, bond or protect a surface or component.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm surface material, gap or damage size, curing time, exposure, finish and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | FIPU |
|---|---|
| Colour | White |
| Packaging | 500 gm, 1.5 kg, 5 kg, 25 kg |
| Cov.(app.) | Use as required |
Overview
A ready-mixed quick drying filler for filling small cracks and surface defects, especially where surface may require painting or redecorating.
- Ready mixed, time saving.
- Economical and convenient to use.
- Ideal for leveling uneven surfaces.
Application
Ensure that the surface of cracks and joints are clean, dry and free from dirt, grease and loose materials.
Plasterboard Partition and Ceiling
Fill the space panels with putty and level flush. Fix reinforced tape over joint and press into fresh putty. Apply 2 coats of PYE PUTTY FILLA and level out to smooth surface ready for decoration.
Fine Hairline Cracks or Crazing
Before use, stir the paste well with scrapper. Use the scrapper to press into the fine lines. Slightly overfill the areas and allow to dry before sanding.
Hollow Block Wall
Run spatula over surfaces to remove loose materials and joints PYE PUTTY FILLA. Apply 2 coats to a thickness of 2 – 3mm, level out to a smooth surface with spatula.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Adhesion | Adheres firmly to all clean, dry and greese free plaster and wood surface. |
| Colour | White |
| Drying time | A thin film dries in approx. 15 – 30mins. When use for levelling irregular surface, drying time may increase to 1 hour. |
| Sandability | Formulated for easy sanding. |
| Odour | Odourless on drying. |
| Coverage | Approximately 3.36s.q.m per kg. |
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
