PYE PRUFSEAL 50
Flexible Cementitious Waterproofing
A two components flexible cementitious waterproofing system with elongation. It is applied as a slurry and dries to form a membrane that is permeable to vapour but a barrier to water and moisture
- Suitable for waterproofing bathroom floors & walls.
- For kitchen floors, swimming pools and water tanks.
- Product Code: PRPL
- Packaging: 6 kg / set, 30 kg / set, 2 liter, 10 liter, 4 kg, 20 kg
Quick Selection Notes
- Use this when: You need PYE PRUFSEAL 50 to repair, seal, bond or protect a surface or component.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm surface material, gap or damage size, curing time, exposure, finish and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | PRPL |
|---|---|
| Colour | Natural Cement |
| Packaging | 6 kg / set, 30 kg / set, 2 liter, 10 liter, 4 kg, 20 kg |
| Cov.(app.) | 1.72 kg / m² / mm |
Overview
A two components flexible cementitious waterproofing system with elongation. It is applied as a slurry and dries to form a membrane that is permeable to vapour but a barrier to water and moisture.
- Suitable for waterproofing bathroom floors & walls.
- For kitchen floors, swimming pools and water tanks.
- Ideal for bathroom and water tanks.
Application
Ensure surfaces must be clean, free of dust, oil, paint, grease or any loose materials. A high-pressured air or water jet is recommended for this process. The substrate must be prewetted but over wetting resulting in accumulation of water on the surface should be avoided.
Mixing
Add the entire 20kg bag of Part A to 10 liter of Part B. Use a power drill to mix thoroughly until a slurry consistency is achieved. Avoid high speed or excessive mixing to avoid entrapped air into the mix.
Application
PYE PRUFSEAL 50 is to be applied in 2 coats, with a minimum thickness of 1mm for each coat. Apply using a trowel or a stiff brush horizontally for the first coat and vertically for the second or vice versa. The first coat must be at least semi-cured (touch dry) before the application of the second coat.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Solids | Cement, Aggregate & Filler |
| Admixture | Acrylic Copolymer |
| Pot life | 1 hour |
| Elongation | 50% at break |
| Tensile adhesion | > 0.5N/mm2 |
| Thickness | 1 – 1.5mm per coat |
| Coverage | 1.72kg/m2 |
| Safety | Non-hazardous and non-flammable. |
Shelf Life
PYE PRUFSEAL 50 has a shelf life of 6 months, if kept in a dry and cool condition.
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
