PYE TILE BOND 08
Cement Based Tile Adhesive
PYE TILE BOND 08 is a thin-bed cement-based adhesive for the fixing of ceramic floor, wall tiles and mosaics that complied to C2TE.
- Ideal for fixing ceramic tiles, granite, mosaics and porcelain tiles in bathrooms, kitchens, laundry, family rooms, entrance halls, swimming pools and outdoor living areas on concrete, cement render and brick work. DO NOT use PYE TILE BOND 08 on gypsum and wood.
- Product Code: WATB
- Packaging: 25 kg
Key Product Information
| Product Code | WATB |
|---|---|
| Colour | Grey |
| Packaging | 25 kg |
| Cov.(app.) | 1kg / m² / mm |
Overview
PYE TILE BOND 08 is a thin-bed cement-based adhesive for the fixing of ceramic floor, wall tiles and mosaics that complied to C2TE. It has been specially formulated for use over sand / cement render, is non-toxic, easy to apply and no wetting of tiles is required when fixing.
- Ideal for fixing ceramic tiles, granite, mosaics and porcelain tiles in bathrooms, kitchens, laundry, family rooms, entrance halls, swimming pools and outdoor living areas on concrete, cement render and brick work. DO NOT use PYE TILE BOND 08 on gypsum and wood.
Application
Ensure surfaces to be tiled must be firm and clean from dust, paint and other contaminants.
Mixing
Mix the powder with sufficient water to a creamy consistency 6 to 7.5 litre clean water. Mix sufficient to last 30 minutes. Allow mixture to stand for 2-3 minutes.
Application
Sand/ cement render should be left with a woodfloat finish. It must be clean and free from dust and oil. Allow 7 days after rendering before fixing tiles with PYE TILE BOND 08. Use a notched trowel to spread the adhesive on the surface to a thickness of about 5mm for flat-backed ceramic tiles. Tiles with grooves, ridges or knobs on the back should be laid using 6mm x 6mm notched trowel. Press tiles in place with a twisting motion. Firmly tap the tile with the handle of a hammer or rubber mallet whilst positioning the tiles. When laying large areas, ensure that expansion joints are incorporated in the design stage.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Colour | Grey |
| Form | Powder |
| Coverage | 1kg/mm/m2 |
| Min Thickness | 5mm |
| Grouting | Grouting should commence at least 24 hours after fixing the tile. |
Â
| Standard Test Method | Requirement | Result |
| Tensile Strength According to EN1348 (28 days SC) |
≥1.0 N/mm2 | Pass |
| Tensile Strength According to EN1348 (7 days SC + 21 days water immersion) |
≥1.0 N/mm2 | Pass |
| Tensile Strength According to EN1348 (14 days SC + 14 days 70° + 1 day SC) |
≥1.0 N/mm2 | Pass |
| Open Time according to EN1346 (20 minutes) | ≥0.5 N/mm2 | Pass |
Â
Shelf Life
12 months if stored in a cool and dry condition.
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
