PYE GROUT
Waterproof Tile Grout
A protective waterproof dense cement mixture used to fill the joints of mosaic, ceramic and other similar tiles
- Smooth and non crack.
- Prevents the ingress of water behind the tiling surface.
- Product Code: WAGR
- Packaging: 1 kg, 5 kg, 10 kg, 20 kg
Quick Selection Notes
- Use this when: You need PYE GROUT to repair, seal, bond or protect a surface or component.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm surface material, gap or damage size, curing time, exposure, finish and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | WAGR |
|---|---|
| Colour | White |
| Packaging | 1 kg, 5 kg, 10 kg, 20 kg |
| Cov.(app.) | 2 m² / kg |
Overview
A protective waterproof dense cement mixture used to fill the joints of mosaic, ceramic and other similar tiles.
- Smooth and non crack.
- Prevents the ingress of water behind the tiling surface.
- Resistance to fungus and mould growth.
Application
Allow the tile adhesive to cure for 24 hours before grouting. On non-porous backings, the time interval should be extended to a minimum of 3 days. For exterior work, it is important that water is not allowed to penetrate the open joints before grouting commences.
Mixing
Add sufficient water and mix to a thick uniform, creamy consistency. Allow to stand for 5 – 10 minutes and re-stir
before use.
Application
- Grout tiles after the adhesives has had sufficient time to set.
- Dampen the tile joint with a sponge and apply the prepared grout, spreading at the rate of 3m at a time.
- Work well into joints with a sponge, grouting tools or squeegee.
- Remove surplus grout with a piece of damp cloth or sponge.
- Allow grout to set firm (approximately one day).
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Colour | White, Grey |
| Adhesion | Excellent badhesion to concrete, masonry and asbestos cement. |
| Drying time | 1 – 2 hours under normal conditions. |
| Coverage | Approx. 2sq.m. of tiles per kg. |
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
