PYE TILE GROUT
Ready Mixed Grout
A ready mixed quick drying compound for grouting & sealing ceramic and mosaic wall / floor tiles only.
- Suitable for use in tiled areas of kitchens, shower recesses, toilet walls and floors.
- It is suitable for both interior and exterior use.
- Product Code: WATI
- Packaging: 500 gm
Quick Selection Notes
- Use this when: You need PYE TILE GROUT to keep moving parts, fasteners or machinery serviceable during maintenance.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm material compatibility, operating temperature, load, exposure and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | WATI |
|---|---|
| Colour | White, Grey |
| Packaging | 500 gm |
| Cov.(app.) | 2 m² / kg |
Overview
A ready mixed quick drying compound for grouting & sealing ceramic and mosaic wall / floor tiles only.
- Suitable for use in tiled areas of kitchens, shower recesses, toilet walls and floors.
- It is suitable for both interior and exterior use.
Application
Surface Preparation/ New Work
Ensure surfaces clean & dampen joints by rubbing up, down and across tiles. Use wet sponge, brush or cloth. Dry tile surfaces with clean cloth.
Surface Preparation/ Old Work
Chisel out about 1/6’’ of old grout. Scrub surface thoroughly with kitchen cleanser. Clean & dampen joints by rubbing up, down and across tiles with wet sponge, brush or cloth. Dry tile surface with clean cloth.
Tinting
Grout can be tinted before use to match colored tile using any latex base or universal colorant.
Application
Work grout thoroughly into each joint with a sponge, float or finger. Wait 10 minutes for grout to set, then remove excess by lightly wiping diagonally across each joint with a sponge or cloth. Close cap tightly after use.
Finishing
When grout is firm (about 1 hour) polish with clean dry cloth. Allow to dry 16 – 24 hours before exposure to water.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Colour | White, Grey |
| Adhesion | Excellent adhesion to concrete, masonry and asbestos cement. |
| Drying time | 1 – 2 hours under normal conditions. |
| Coverage | Approx. 2sq.m. of tiles per kg. |
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
