PYE FLOORSHIELD
Acrylic Floor Coating
This is a single component 100% acrylic water based coating. It is suitable for most well prepared sound concrete floor surfaces and asphalt surfaces too.
- Suitable for concrete / Asphalt floor surfaces.
- Drive away.
- Product Code: REFS
- Packaging: 1.5 kg, 4 kg, 18 kg
Key Product Information
| Product Code | REFS |
|---|---|
| Colour | As per colour card |
| Packaging | 1.5 kg, 4 kg, 18 kg |
| Cov.(app.) | 2-3 m² / kg |
Overview
This is a single component 100% acrylic water based coating. It is suitable for most well prepared sound concrete floor surfaces and asphalt surfaces too. It has excellent adhesion and provide a tough, durable and UV resistance finish with a good degree of chemical and stain resistance.
- Suitable for concrete / Asphalt floor surfaces.
- Drive away.
- Parking Lots.
Application
Ensure floors should be sound, dry and all traces of oil, grease and other foreign matters to be removed. Concrete floors should be well cured and smooth concrete must be etched. Etching can be done using PYE CEMENT ETCHER.
Mixing
Stir thoroughly with a broad, flat stirrer before use. If necessary dilute up to 10% of clean water to the mixture as the first or primary coat.
Application
Apply using a brush or roller. Normally 2 coats is sufficient and allow a 2 to 4 hour interval between coatings (depending on the humidity and weather). It is best recommended to apply PYE FLOORSHIELD in the direction against previous application of the first coat for optimum results. PYE FLOORSHIELD should not be applied in conditions of excessive humidity and very hot surfaces. Do not apply when the surface is wet.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use.
Product Detail
Technical Information
| Colour | As per colour card. |
| Form | Liquid |
| Adhesion | Excellent adhesion to all clean, dry and sound surfaces. |
| Coverage | Approx. 2 – 3m2/kg/ coat depending on the substrate surface. |
| Drying time | Touch dry – 1 hour, recoat – 4 hours and hard dry – 48 hours. |
| Recoating time | 4 hours |
| Thinning | Water |
Â
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
