PYE KREK-SEAL
Resin Based Crack Sealer
Specially formulated liquid sealant. Its low viscosity allows it to penetrate, fill and seal the hairline cracks in concrete, plaster, brick blocks or other similar types of materials.
- Can be used on both horizontal and vertical plaster surfaces.
- For hollow and concrete floors, mosaic and ceramic tiles, joints of floors and walls.
- Product Code: REKR
- Packaging: 500 ml, 4 litre, 20 litre
Quick Selection Notes
- Use this when: You need PYE KREK-SEAL to store items so users can find, pick and replenish them safely.
- User perspective: Pickers and warehouse users need clear access, suitable load capacity and a layout that supports daily replenishment.
- Check before ordering: Confirm item size, load per level, bay width, floor condition, picking method and future expansion needs.
- Site fit: Match it to the load, bay layout, picking frequency and available floor or wall space.
- Ask Y K Toh to confirm: Share load sizes, weights, photos, floor plan and picking or storage workflow so the recommendation is sized around the real job.
Key Product Information
| Product Code | REKR |
|---|---|
| Colour | White |
| Packaging | 500 ml, 4 litre, 20 litre |
| Cov.(app.) | Use as required |
Overview
Specially formulated liquid sealant. Its low viscosity allows it to penetrate, fill and seal the hairline cracks in concrete, plaster, brick blocks or other similar types of materials.
- Can be used on both horizontal and vertical plaster surfaces.
- For hollow and concrete floors, mosaic and ceramic tiles, joints of floors and walls.
- Suitable for toilet areas, cracks on bath tubs and toilet floor and precast concrete.
Application
Ensure surfaces are clean, dry and free from dirt, grease and loose materials.
Cracks on tiles and mosaic joints
Fill PYE KREK-SEAL in a plastic bottle (if purchased in 20 liters pack) and squeeze the liquid sealer into the joints until no more sealer can penetrate.
Cracks on vertical surfaces
Use a piece of plastic to form reservoirs at strategic points along the cracks. Keep topping up.
Crazed floors
Flood the area for a period of 30 minutes and top up if necessary.
Cracks on flat roofs and floors
Apply by squeezing bottle along crack, repeating the treatment until no more sealer penetrates.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use.
Product Detail
Technical Information
| Colour | White |
| Form | Liquid |
| Odour | Odourless after application. |
Â
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
