PYE SLATE-SEAL
Clear Protecting Acrylic Sealer
Specially formulated colourless protecting coating with added Ultra Violet (UV) additive for treatment of interior and exterior cementitives and concrete surfaces against scratching
- Ideally, suited for slate, quarry and paver tile, flagstone stamped concrete and concrete tile.
- For all kind of concrete bricks, slates, paves, stone and terra cotta tiles.
- Product Code: RESL
- Packaging: 1 litre, 5 litre 20 litre
Quick Selection Notes
- Use this when: You need PYE SLATE-SEAL to keep moving parts, fasteners or machinery serviceable during maintenance.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm material compatibility, operating temperature, load, exposure and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | RESL |
|---|---|
| Colour | Colourless |
| Packaging | 1 litre, 5 litre 20 litre |
| Cov.(app.) | 7-10 m² / litre |
Overview
Specially formulated colourless protecting coating with added Ultra Violet (UV) additive for treatment of interior and exterior cementitives and concrete surfaces against scratching.
- Ideally, suited for slate, quarry and paver tile, flagstone stamped concrete and concrete tile.
- For all kind of concrete bricks, slates, paves, stone and terra cotta tiles.
- Can be used on cementitious substrates too.
Application
Ensure surfaces are clean, dry and free from dirt, grease, efflorescence (a whitish substance) that can prevent absorption of the sealer. Any organic growth such as fungi or algae should be treated first with PYE FUNGIRID. Repair chip off or concrete surfaces and allow drying before treated. New concrete surface should cure for at least 28 days.
Application
Using brush, roller or low-pressure air spray. Apply evenly on all dry dust free surfaces. For normal application 2 coats are sufficient. However 3 coats may be required for heavy-duty driveway.
Note: PYESLATE SEAL cannot be applied to wet or damp surfaces.
Cleaning of Equipment
Clean all tools and application equipment with white spirit after use.
Product Detail
Technical Information
| Colour | Colourless |
| Form | Liquid |
| Odour | Solvent odour |
| Adhesion | Excellent adhesion to clean, dry and sound surfaces. |
| Drying time | Allow 4 hours between coats. |
| Coverage | Approx. 7 – 10 sq.m per litre. |
| Safety | Non-hazardous. |
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
