PYE SURFACE JOINT COMPOUND
Multi-Purpose Finishing Compound
Premixed asbestos-free finishing compound for taping, topping and texture gypsum wall board
- Can be used for filling cracks or holes.
- May be used as skim coating.
- Product Code: FISU
- Packaging: 1.5 kg, 5 kg, 25 kg
Quick Selection Notes
- Use this when: You need PYE SURFACE JOINT COMPOUND to repair, seal, bond or protect a surface or component.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm surface material, gap or damage size, curing time, exposure, finish and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | FISU |
|---|---|
| Colour | Off-White |
| Packaging | 1.5 kg, 5 kg, 25 kg |
| Cov.(app.) | Joint finishing – 12 m² / 25 kg, Texture – 13 m² / 25 kg / mm |
Overview
Premixed asbestos-free finishing compound for taping, topping and texture gypsum wall board.
- Can be used for filling cracks or holes.
- May be used as skim coating.
Application
Ensure that the surface must be dry, clean, free of dust, oil, paint, grease and other foreign materials. All protruding nails or joint tapes must be depressed 1mm below the finished surface.
Application as Joint Finishing:
Application by trowel, scraper and blade knife by layers and subject to surface conditions and strictly on dry surfaces. Apply first thin layer between the joint of gypsum board and embed with joint tape. Allow it to dry before apply second coat. Final coat shall apply with wider blade (10”) as to cover the joints & fasteners surfaces.
Application to Inside Corners / Outside Corners Finishing:
Apply compound to both sides, fold tape along the centerline and press into position. Remove the excess compound, then apply a thin finish layer over the tape for a smooth finish.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Colour | Off white |
| Drying time | Depend on temperature of work place. |
| Sandability | Sand lightly with fine sandpaper. |
| Odour | Odourless on drying. |
| Coverage | Approx. 1kg / 1.8m – 2.0m. |
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
