PYE POWDER FILLA
Cellulose Filler
White plaster filler reinforced with cellulose for patching holes and cracks in most interior surfaces.
- Does not shrink.
- Excellent adhesion.
- Product Code: FIPO
- Packaging: 454 gm, 1.8 kg, 25 kg
Quick Selection Notes
- Use this when: You need PYE POWDER FILLA to repair, seal, bond or protect a surface or component.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm surface material, gap or damage size, curing time, exposure, finish and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | FIPO |
|---|---|
| Colour | White |
| Packaging | 454 gm, 1.8 kg, 25 kg |
| Cov.(app.) | Use as required |
Overview
White plaster filler reinforced with cellulose for patching holes and cracks in most interior surfaces.
- Does not shrink.
- Excellent adhesion.
- Suitable for plaster, masonry, wood, brick and plasterboard.
Application
Ensure surfaces of holes, cracks and joints are clean, dry and free from dirt, grease and loose material. Brush out all loose materials with a stiff brush. Do not wet or prime the surface prior to filling. Paint nail heads to prevent rust staining.
Mixing
Add 2 parts PYE POWDER FILLA to 1 part clean water and mix thoroughly to a paste. The mixture should be used up within one hour after mixing.
Application
Press the mixed PYE POWDER FILLA firmly into the hole/ crack with a filling knife or scraper and smoothen off. For sanding, slightly overfill and allow to dry before sanding down with medium grade sand paper. Wipe over dusty surface with a damp sponge. The surface will be ready for redecoration within two to three hours before using.
Note: All tools used must be cleaned before using.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Adhesion | Adheres firmly to all clean, dry and grease – free plaster and wood surfaces. Will not crack or fall out when dry. |
| Colour | White |
| Drying time | A thin film dries in approx. 15 – 30mins. When used for levelling irregular surfaces, drying time may increase to 1 hour. |
| Sandability | PYE POWDER FILLA has been formulated for easy sanding. |
| Odour | Odourless on drying. |
| Coverage | 35 – 40sq.ft. per kg |
| Safety | Non-flammable and non-toxic. |
Â
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
