PYE WOOD FILLA
Interior Wood Filler
A fast drying, ready-mixed interior wood filler. It is superior to solvent-based plastic woods, is easy to use and shrinkage is minimal.
- Can be painted, stained or varnished without primming.
- Excellent durability.
- Product Code: FIWO
- Packaging: 500 gm, 1.5 kg, 5 kg, 25 kg
Key Product Information
| Product Code | FIWO |
|---|---|
| Colour | Natural, Teak |
| Packaging | 500 gm, 1.5 kg, 5 kg, 25 kg |
| Cov.(app.) | Use as required |
Overview
A fast drying, ready-mixed interior wood filler. It is superior to solvent-based plastic woods, is easy to use and shrinkage is minimal.
- Can be painted, stained or varnished without primming.
- Excellent durability.
- Suitable for nail holes, crack or split in any timber.
Application
Ensure surfaces are clean, dry and free from dirt, grease and loose material.
Application
Mix well before use to ensure a smooth even consistency. Apply with a filling knife or scraper. Slightly overfill the surfaces to allow for sanding back. A wet filling knife will aid in final smoothing. The filled surface has to be dry before sanding, staining or painting. For holes deeper than 6mm, fill in layers allowing each layer to dry before continuing. Always remember to replace the lid firmly when the product is not in use.
Redecorating
PYE WOOD FILLER dries to a natural pine or teak colour and it can be painted without priming. If staining, varnishing or finishing wood to other than natural pine or teak, mix stain or paint colorant into the filler to match the wood colour. Test your colour and remember to allow PYE WOOD FILLER to dry before checking the colour.
Note: PYE WOOD FILLER is not designed for use in wet areas or for gaps that are subject to structural movement. For such application, use acrylic sealants.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Adhesion | Excellent adhesion to all types of interior woodwork. |
| Colour | Natural or Teak |
| Drying time | A thin film dries in approximately 30mins. |
| Binder | Acrylic based |
| Sandability | PYE WOOD FILLER has been formulated with a blend of very fine filler pigments which allows for easy sanding. It is ideal for end grain filling or for obtaining that extra smooth mirror finish on painted surfaces. |
| Odour | Pleasant |
| Coverage | 10 sq. ft. per 500gm. |
Â
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
