Time and labor
Manual repacking takes time
Manual repacking slows the change point and adds repeated handling. PARATUS positions the replacement pallet under the goods instead of asking the team to restack the load by hand.
Pallet changing equipment at Y K TOH
SW-PARATUS pallet changers for Singapore repalletizing.
PARATUS Change moves the pallet under supported goods, so teams can change loaded pallets quickly without manual restacking, tipping or turning the load. Y K TOH helps buyers compare the fixed, flexible, high-throughput and pallet-stacking routes.
Under 30 seconds
Gentle on goods
Made in Germany
750+ customer reference point
Pallet format check
Use this page to solve the pallet-change problem first.
SW-PARATUS is strongest where the current process depends on manual repacking, damaged pallet handling, hygiene transfer or slow changeover between pallet types.
Supported load
Tipping may not suit the goods
Some goods should stay upright and supported. The PARATUS principle is useful when tipping, turning or crushing the goods would add risk.
Wrong pallet type
Pallet condition blocks flow
Defective, contaminated or wrong-size pallets can hold up receiving, storage or dispatch. This is where wood, plastic, aluminium or metal pallet changes need a controlled route.
Hygiene pallet route
Hygiene transfers need control
Food, pharma and clean production areas often need repeatable transfer to hygienic pallets. Start by confirming pallet material, load stability and cleaning requirement.
PARATUS Change sequence
The PARATUS Change principle is simple to explain on site.
The operator keeps the goods supported while the target pallet is pushed under the load with a forklift or industrial truck. The three-step view helps procurement, safety and operations teams compare it against manual repacking or conventional pallet tippers.
Load
Bring the loaded pallet to the unit
The forklift brings the loaded start pallet to the PARATUS Change unit.
Slide
Move the target pallet underneath
The replacement pallet slides below the supported goods.
Change
Clear the start pallet route
The load transfers onto the target pallet while the original pallet route clears.
Use the official demos, then confirm the Singapore site fit.
SW-PARATUS publishes public demonstration videos, but the buying decision still depends on pallet size, load stability, forklift route and the actual change point.
What the videos are useful for
- CLASSIC demonstrations showing the basic pallet-under-goods principle.
- MOBILE demonstrations for flexible repalletizing locations.
- +LIFT demonstrations showing pallet changing followed by stacking.
- User-story clips that help operations teams understand the movement sequence.
What Y K TOH should still verify
Send the pallet photo, load photo, target pallet type, load weight, floor-space photo and forklift route before quotation. If the goods are sensitive, unstable or hygiene-controlled, include a short video of the current repalletizing process.
Open SW-PARATUS YouTube channel
Choose the SW-PARATUS model by workflow, not only by pallet size.
These model cards link to YKTOH’s current product pages. Confirm final sizing, compatibility and lead time before ordering.
Fixed pallet-changing point
Change CLASSIC
Dedicated repalletizing points where operators change loaded pallets repeatedly in one workstation.
- Floor-anchored installation
- EURO, INDUSTRY, GMA and CARGO routes
- Good fit for regular daily use
Flexible facility locations
Change MOBILE
Sites that need pallet changing at different points in the warehouse, plant or process area.
- Relocatable rail-based setup
- Requires stable rear bracing
- Useful when the work point changes
High-throughput pallet changes
Change MULTI
Operations with higher daily volume that need to change two or three pallets in a single operation.
- MULTI-2 and MULTI-3 routes
- Can still handle individual changes
- Best for repeated high-volume workflows
Change and stack empty pallets
Change +LIFT
Processes where empty start pallets should be stacked automatically after the pallet change.
- Combines two work steps
- Automatic empty-pallet stacking
- Useful when extra pallet handling is the bottleneck
What Y K TOH checks before recommending a pallet changer.
A short site brief makes the model choice much clearer and prevents a catalogue-only selection.
Pallet and load
- EURO, INDUSTRY, GMA, CARGO or special format.
- Wood, plastic, aluminum, metal or mixed pallet use.
- Load weight, load stability and sensitivity to tipping.
Site and movement route
- Available floor space around the change point.
- Forklift or industrial truck access.
- Fixed workstation, multiple work points or high-volume line.
Process requirement
- Daily change volume and shift pattern.
- Hygiene transfer or contamination control.
- Need to stack or remove empty pallets after the change.
Where SW-PARATUS usually belongs in the operation.
Use the operating environment to shortlist the model before checking exact dimensions and load behavior.
Food and beverage
For hygiene pallet transfer, wood-to-plastic changes and load movement where tipping is not preferred.
Pharmaceutical handling
For controlled pallet changes where clean handling, repeatability and goods protection matter.
Logistics and freight
For damaged, disposable, export or wrong-sized pallet changes before storage or dispatch.
Manufacturing stores
For repeat pallet transfers at receiving, warehouse, production support or internal logistics points.
SW-PARATUS questions buyers usually need answered.
How fast is a PARATUS pallet change?
SW-PARATUS positions the PARATUS Change principle around pallet changes in under 30 seconds. The real site result still depends on load stability, pallet type, operator route and setup.
Which model should I choose?
Use CLASSIC for fixed daily pallet-changing points, MOBILE for flexible locations, MULTI for two or three pallet changes at once, and +LIFT when empty pallets should be stacked after the change.
Can it handle plastic or aluminum pallets?
SW-PARATUS describes the system for changing between wooden, plastic, aluminum, metal and other pallet types. Y K TOH should still confirm dimensions, edge design and height differences before quotation.
Does the pallet changer need a forklift?
For heavy loads, SW-PARATUS says a forklift or industrial truck is usually the practical tool for moving the target pallet under the goods.
What should I send before asking for a quote?
Send pallet photos, load photos, dimensions, weight, current change process, floor-space photo, forklift route and expected daily change volume.
Send the pallet-change job for a practical recommendation.
Y K TOH can advise the closest SW-PARATUS route when the enquiry includes pallet type, load details, site photos, floor space, forklift access and usage frequency.