STOCKY EPT20SS Stainless Steel Electric Pallet Truck 2.0T
A 2,000 kg walk-behind electric pallet truck with stainless steel construction, electric travel and lifting, and electromagnetic braking. The leaflet lists PU tyres; confirm the supplied wheel material.
- Rated load: 2,000 kg at 600 mm load centre
- Power: lithium battery
- Controls: CAN-BUS monitoring and tiller controls
Contact Y K Toh for price and configuration.
Electric pallet handling with stainless steel construction
The STOCKY EPT20SS combines electric travel and lifting with walk-behind control. Its 2,000 kg rated capacity at a 600 mm load centre supports pallet movement through receiving, packing and dispatch areas.
A welded and formed chassis, integrated hydraulic system and CAN-BUS status monitoring support daily handling. Stainless steel cylinder and battery-casing components, tandem load rollers and PU tyres are shown in the leaflet. Confirm the supplied wheel material and operating conditions with Y K Toh.
Download the 3-page product leaflet (PDF)
Match the truck to your site
Send your pallet dimensions, maximum load, floor condition, aisle width and daily travel distance to Y K Toh. For temperature-controlled or hygiene-sensitive areas, include the operating temperature and cleaning method so the supplied configuration can be checked.
Built around everyday pallet movement
- Electric travel and lift: move, raise and lower pallets from the tiller.
- Stainless steel construction: includes a stainless steel hydraulic cylinder and battery casing.
- Integrated hydraulic system: fewer pipes and joints in the lifting system.
- CAN-BUS monitoring: truck-status monitoring and fault diagnosis.
- PU tyres and tandem load rollers: the leaflet lists PU tyres; paired load rollers support pallet movement. Confirm the supplied wheel material.
- Electromagnetic service brake: paired with DC speed control.
Equipment details
Corrosion-resistant cylinder construction.
Helps protect the internal battery cells.
Dual rollers support the pallet load.
Labelled 48V in the leaflet; supplied battery configuration to be confirmed.
Controls within reach
Open either image for a larger view of the labelled controls.
Emergency reverse, horn, lifting and lowering.
Drive control, turtle speed and magnetic key.
The values below transcribe the v6 leaflet table on page 3. Its drawings show different measurements, so these values are not confirmed clearances for the supplied truck. Confirm final dimensions and configuration with Y K Toh before ordering or layout planning.
| General | |
|---|---|
| Power type | Battery |
| Operator type | Pedestrian |
| Load capacity / Rated load Q(t) |
2.0 |
| Load centre distance C (mm) |
600 |
| Load distance, centre of drive axle to fork X (mm) |
950 |
| Wheelbase Y (mm) |
1270 |
| Weight | |
| Service weight kg |
145 |
| Axle loading, laden front/rear kg |
Not stated |
| Axle loading, unladen front/rear kg |
100/34.5 |
| Tyres and chassis | |
| Tyres | PU |
| Tyre size, front Ø × w (mm) |
φ210×75 |
| Tyre size, rear Ø × w (mm) |
φ80×70 |
| Additional wheels (dimensions) Ø × w (mm) |
φ70×36 |
| Wheels, number front/rear (x = driven wheels) | 1x/4 |
| Tread, front b₁₀ (mm) |
Not stated |
| Tread, rear b₁₁ (mm) |
390/525 |
| Dimensions | |
| Lift height h₃ (mm) |
110-115 |
| Height of tiller in drive position min. / max. h₁₄ (mm) |
585/1250 |
| Height, lowered h₁₃ (mm) |
75/85 |
| Overall length l₁ (mm) |
1620 |
| Length to face of forks l₂ (mm) |
470 |
| Overall width b₁ (mm) |
550/685 |
| Fork dimensions s/e/l (mm) |
50/160/1150 |
| Fork width reference, b5 (leaflet table) b₅ (mm) |
550/685 |
| Ground clearance, centre of wheelbase m₂ (mm) |
35 |
| Aisle width for pallets 1000 x 1200 crossways Ast (mm) |
2182 |
| Aisle width for pallets 800 x 1200 lengthways Ast (mm) |
2052 |
| Turning radius Wa (mm) |
1380 |
| Performance | |
| Travel speed, laden/ unladen km/h |
4.2/4.5 |
| Lift speed, laden/ unladen m/s |
0.017/0.02 |
| Lowering speed, laden / unladen m/s |
0.04/0.04 |
| Gradeability, laden/ unladen % |
6/10 |
| Service brake | Electromagnetic |
| Motors | |
| Drive motor rating S2 60min kW |
0.9 |
| Lift motor rating at S3 10% kW |
0.8 |
| Battery acc. to DIN 43531 /35 / 36 A, B, C, no | Not stated |
| Battery voltage, nominal capacity K5 V/Ah |
Configuration to be confirmed |
| Additional data | |
| Battery weight (minimum) kg |
5.5 |
| Energy consumption acc. to VDI cycle kWh/h |
Not stated |
| Type of drive control | DC speed control |
| Sound level at driver´s ear acc. to EN 12053 dB(A) |
≤70 |
Laden / unladen values are shown in that order where stated. The leaflet lists service weight as 145 kg, while its unladen axle loads of 100 and 34.5 kg total 134.5 kg. The battery row has two unlabeled entries, “12/47 x 4 (24-hour)” and “48/20”; it does not identify the supplied battery, charger or tested runtime. Confirm weight, battery capacity and charger pairing with Y K Toh.
Dimensioned drawings
The original v6 leaflet drawings show overall length 1626.89 mm, fork length 1175.21 mm, wheelbase 1251.61 mm and turning radius R1433.73 mm, versus table values of 1620, 1150, 1270 and 1380 mm. The plan view also shows 451.89 mm to the fork face versus 470 mm in the table. The side view labels 1200 mm tiller height, 45 mm fork thickness and vertical references of 53.94, 98.94 and 173.65 mm; the table lists h14 585/1250 mm, fork thickness 50 mm, lowered height h13 75/85 mm and lift height h3 110-115 mm. The plan shows 685 mm outer width and 535 mm inner gap, while the table lists b1 and b5 as 550/685 mm. These drawings do not identify which values apply to the offered configuration. Confirm the supplied dimensions, height datum and fork spread before planning clearances. Select a drawing to open it at full size.
Download all specifications and drawings in the 3-page leaflet
