PYE PRUFCOAT
Flexible Waterproofing Slurry
Used for waterproofing or damping concrete or mortar surfaces. The area to be treated may be either existing or newly created surfaces. PYE PRUFCOAT is not to be used for painted surfaces.
- Suitable for waterproofing non standing water area.
- For kitchen floors, balcony and bathroom.
- Product Code: PRPR
- Packaging: 22.5 kg / Set / 18 kg , 4.5 liter
Quick Selection Notes
- Use this when: You need PYE PRUFCOAT to repair, seal, bond or protect a surface or component.
- User perspective: The maintenance user needs the product to match the material, surface condition and job method.
- Check before ordering: Confirm surface material, gap or damage size, curing time, exposure, finish and application method.
- Site fit: Match it to the substrate, exposure, application method and cleanup or inspection process.
- Ask Y K Toh to confirm: Share application photos, material type, surface condition, quantity and the result you need so the recommendation is sized around the real job.
Key Product Information
| Product Code | PRPR |
|---|---|
| Colour | Natural Cement |
| Packaging | 22.5 kg / Set / 18 kg , 4.5 liter |
| Cov.(app.) | 1 kg / m² / mm |
Overview
Used for waterproofing or damping concrete or mortar surfaces. The area to be treated may be either existing or newly created surfaces. PYE PRUFCOAT is not to be used for painted surfaces.
- Suitable for waterproofing non standing water area.
- For kitchen floors, balcony and bathroom.
- Ideal for balconies.
Application
Ensure surface must be clean and free from standing water, grease, dust or any loose materials in order to achieve a good bonding. Avoid cracks and fillet edge, shall repaired to ensure that the surface is sound, even and clean. Dampen the surface if it is dry. Remove any excess water.
Mixing
Add 1 portion of Part B to 4 portions of Part A. Mixing can be done manually or by the use of an electric mixer to form a paste – like consistency to be brushed onto the concrete surface. Allow the liquid soak into the powder at least 5 minutes before remixing again. Use within 30 minutes.
Application
To be applied horizontally for the first coat and vertically for the second or vice versa. Apply the first coat when the surface is still damp. Leave to cure for approximately 4 to 8 hours at room temperature before applying second coat. For best results it is recommended that the second coat be applied after 24 hours (usually for floor applications). PYE PRUFCOAT can be applied using a trowel or a hard paint brush.
- For waterproofing bathrooms, terraces and balconies: 1kg/m2 per coat, with a minimum of 2 coats are required.
- For waterproofing coating up to 1m water head: 1.5kg/m2, with a minimum of 2 coats are required.
- For waterproofing coating more than 1m water head: 2kg/m2, with a minimum of 2 coats are required.
Note: PYE PRUFCOAT must be applied in a minimum of 2 coats and must not be applied more than 2kg/m2 in a single layer.
Cleaning of Equipment
Clean all tools and application equipment with clean water immediately after use. Hardened or cured material can only be removed mechanically.
Product Detail
Technical Information
| Colour | Natural cement |
| Form | Part A: Powder / Part B: Liquid |
| Solids | Cement and high grade silica. |
| Admixture | High strength acrylic polymers. |
| Pot life | Approx. 2 hours |
| Thickness | 2 – 3mm |
| Coverage | 1kg/m2/mm |
| Health & Safety | Non-hazardous, non-flammable and non-toxic |
Shelf Life
6 months when unopened.
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Principal Documents
Product information and image prepared from the PYE Products principal website. Source: PYE Products.
