Redefine the job
A bollard can guide, separate, resist, deflect or absorb contact. Define which result matters at the exact location.
Video buyer guide
Mastering Industrial Bollards
A 9-minute buyer guide to matching bollards with traffic, impact risks and real site conditions.
9:24Practical overview
6 topicsFrom risk to installation
Site-firstProtection starts with the hazard
Choose the protection, not just the post
The video explains why selection begins with the target, vehicle movement, impact direction and floor conditions.
Right zone, right risk
Check what can be hit, how traffic approaches, who is nearby and what failure would interrupt.
Steel or polymer
Compare rigid and flexible behaviour against the expected contact, maintenance needs and protected asset.
Avoid weak assumptions
Installation pitfalls
Check slab condition, anchors, buried services, clearances, pedestrian access and the full impact envelope before fixing positions.
A practical four-step specification
Turn a general request for bollards into a site-based protection brief that suppliers can assess consistently.
Observe
Name the hazard, protected target, vehicle route and likely approach.
Calculate
Capture vehicle mass, operating speed, load, angle and impact height.
Verify
Check product test evidence, deflection, floor condition and fixing method.
Specify
Set the performance criteria, layout, clearances, installation scope and evidence required.
Use this guide as a starting point. Final layout and product selection should be checked against the actual site, floor, equipment and risk assessment.
Map the impact envelope
Do not stop at the bollard centreline. Check where protection can move under contact, what remains protected, and what sits inside the deflection zone.
- Vehicle and load
- Speed and approach angle
- Protected asset
- Floor condition and anchors
- Pedestrian routes
- Operating clearances
Fit bollards into the wider traffic plan
Singapore’s WSH Council advises employers to assess workplace traffic risks, demarcate pedestrian and vehicle routes, and plan controls around actual transport activities and site conditions. Bollards can support that plan, but they do not replace traffic rules, training, supervision or a site risk assessment.
Ready to review your traffic route?
Send photos, vehicle details, floor information and the asset to protect. Y K TOH can help shortlist a suitable bollard family and layout for discussion.
Product suitability depends on the actual hazard, traffic, installation surface, operating environment and required performance evidence.